: Istanbul-Turkey: +905395991206 - Amman-Jordan: +962785666966 London-UK: +447481362802
-->

Conferences

Fluid Flow Control in the Process Industry


Introduction:

Modern fluid flow control techniques in fluid systems that are encountered in the process and chemical industry, involve the control of flow rate; measurements of pressure and temperature; and, other quantities at upstream and downstream locations. They also involve a means for enabling the passing of maximum flow rate in case of emergencies. Fluid movers such as pumps and compressors of various designs have their own flow control devices for regulating flow rates, pressures, and in some cases, motor loads (variable speed motors or variable speed couplings). Control valves play a major role in fluid flow control. They are used for pressure reduction, control of delivery flow rates, back pressure control, pressure relief, etc.

Fluid flow measurement is the most important process variable in the operation and control of fluid transport in piping systems and pipelines. Flow control data are monitored and computerized; and line flow balances are used to check for discrepancies on an hourly, daily, or weekly bases. Flow measurements are done using some suitable flow meters: differential pressure meters, volumetric flow meters, or mass flow meters. The training will cover all practical aspects of industrial fluid flow measurements, analysis of results, and relevant aspects of accuracy

Targeted Groups:

  • Engineers and technicians in oil & gas, chemical and process industries
  • Process, mechanical and chemical engineers
  • Engineers and technicians who deal with reactors and piping systems
  • Design engineers, project engineers
  • Control, automation and instrumentation engineers

Conference Objectives:

At the end of this conference the participants will be able to:

  • Recognize the physical characteristics of fluids that are to be measured by one of the flow measuring techniques
  • Learn about the measuring techniques and their capabilities and limitations
  • Understand of principles of existing world standards and codes related to fluid flow measurement
  • Select the right measurement techniques: an estimate of the accuracy and uncertainty of results
  • Recommend guidelines for diagnosing the problems in the operation of the entire system based on flow monitoring

Targeted Competencies:

  • Principles of selecting the most appropriate fluid flow measurement for the given industrial application
  • Guidance for optimum setup of measurements and obtaining accurate results
  • Practical real-life examples of the application of the most effective instruments for flow measurements of gases and liquids and multi-phase mixtures
  • Influence of fluid properties on the final results of flow measurements
  • Economical issues: cost and benefit analysis in the light of monitoring a system

Conference Content:
Unit 1: Fluid Flow Control in the Process Industry:

  • Importance of fluid flow control in the process industry
  • Classification of fluid flow measurement techniques
  • Types of fluid flow measurements
  • World standards related to fluid flow measurement
  • Physical properties of liquids, gases, and multiphase fluids
  • Gas laws and expansion of liquids

Unit 2: Basic Principles of Fluid Flow in Pipes and Other Geometries:

  • Relationship between pressure and velocity
  • Complexities of flow of two-phase fluids
  • Specifics related to measurements of velocity, pressure
  • Flow-meters based on differential pressure
  • Volumetric flowmeters
  • Mass flow-meters, probes and tracers

Unit 3: Other Issues Related to Measurements:

  • Probes and tracers
  • Readouts and related devices
  • Proving systems
  • Fluid balance study
  • Auditing

Unit 4: Installation of Instruments:

  • Effect of instrument installation on the accuracy of results
  • Accuracy requirements and related issues
  • Uncertainty and statistics
  • Calibration of measuring instruments
  • Maintenance of meter equipment
  • Recent developments and likely future trends

Unit 5: Flow Control of Pumps, Compressors, and Fans:

  • Control valve application
  • Flow control system in pumps stations
  • Flow control system in compressor stations
  • Flow control in pipelines
  • Pipeline monitoring systems


UAE (Dubai)
25/4/2021 - 29/4/2021
Euro 2500
UAE (Dubai)
5/12/2021 - 9/12/2021
Euro 2500
UAE (Dubai)
18/7/2021 - 22/7/2021
Euro 2500
Egypt (Cairo)
26/12/2021 - 30/12/2021
Euro 2500
Egypt (Cairo)
7/3/2021 - 11/3/2021
Euro 2500
Egypt (Cairo)
20/6/2021 - 24/6/2021
Euro 2500
Morocco (Casablanca)
8/8/2021 - 12/8/2021
Euro 2500
Jordan (Amman)
23/5/2021 - 27/5/2021
Euro 2500
Jordan (Amman)
14/11/2021 - 18/11/2021
Euro 2500
UK (London)
20/9/2021 - 24/9/2021
Euro 4500
UK (London)
9/8/2021 - 13/8/2021
Euro 4500
Egypt (Sharm El-Sheikh)
2/5/2021 - 6/5/2021
Euro 2500
Egypt (Sharm El-Sheikh)
18/7/2021 - 22/7/2021
Euro 2500
Malaysia (Kuala Lumpur)
26/12/2021 - 30/12/2021
Euro 3500
Malaysia (Kuala Lumpur)
4/7/2021 - 8/7/2021
Euro 3500
Turkey (Istanbul)
27/6/2021 - 1/7/2021
Euro 3000
Turkey (Istanbul)
12/12/2021 - 16/12/2021
Euro 3000
Turkey (Istanbul)
22/8/2021 - 26/8/2021
Euro 3000
France (Paris)
13/12/2021 - 17/12/2021
Euro 4500
Switzerland (Geneva)
28/6/2021 - 2/7/2021
Euro 4500
Spain (Barcelona)
31/5/2021 - 4/6/2021
Euro 4500
Spain (Barcelona)
29/11/2021 - 3/12/2021
Euro 4500
Italy (Rome)
19/4/2021 - 23/4/2021
Euro 4500
Italy (Rome)
23/8/2021 - 27/8/2021
Euro 4500
Manama (Bahrain)
20/6/2021 - 24/6/2021
Euro 2500
Manama (Bahrain)
1/8/2021 - 5/8/2021
Euro 2500
Kuwait (Kuwait)
16/5/2021 - 20/5/2021
Euro 2500
Spain (madrid)
27/9/2021 - 1/10/2021
Euro 4500
USA (Boston)
13/12/2021 - 17/12/2021
Euro 5000
Netherlands (Amsterdam)
22/3/2021 - 26/3/2021
Euro 4500
Netherlands (Amsterdam)
23/8/2021 - 27/8/2021
Euro 4500
Canada (Toronto)
8/3/2021 - 12/3/2021
Euro 5000
Germany (Munich)
15/11/2021 - 19/11/2021
Euro 4500
Online
10/10/2021 - 14/10/2021
Euro 1250
Online
2/5/2021 - 6/5/2021
Euro 1250
Online
17/10/2021 - 21/10/2021
Euro 1250
Online
14/3/2021 - 18/3/2021
Euro 1250