Istanbul-Turkey: +905395991206 - Amman-Jordan: +962785666966 - London (UK): +447481362802

Conferences & Workshops

Electrical Faults: Causes, Analysis, Detection & Remedies


The conference is concerned with the calculation of fault currents in practical electrical power systems. Short-circuit currents are associated with large amounts of very destructive energy and therefore calculations must be made to ensure that the short-circuit ratings of equipment are adequate to cater for these high currents. An accurate assessment of these currents is also essential for determining the settings of the system protection devices.

The methods of analysis, used throughout the industry, are thoroughly explained in this seminar. A powerful engineering software package that makes complex and repetitive calculations easy to follow and document is used throughout the seminar to ensure that attention to detail is not compromised and minimum simplifications are made. A considerable portion of the conference is devoted to the application of these methods to practical systems, starting from the preparation of the system for analysis through the calculation process, by manual calculation, and by the use of computer analysis to the point of application of the results. The conference is illustrated by practical examples of systems including ones as explained in detail in industrial standards that engineers need to be familiar with and able to follow and apply. Finally, industrial software programs are introduced that are capable of modeling complex electrical systems and make power system fault analysis a relatively easy task for engineers provided that one can explain and understand the results a computer program gives. This is important as with any computer software-based application where if the input data are wrong, for whatever reason, the results are also wrong and one needs to be able to observe such errors and make engineering judgments for their correction

Targeted Groups:

  • Electricians
  • Design electrical engineers
  • Electrical supervisors
  • Plant electricians
  • Operations & maintenance engineers, supervisors & technicians
  • Maintenance technicians

Conference Objectives:

At the end of this conference the participants will be able to:

  • Learn about the basic theory of the three-phase power system under balanced and unbalanced conditions.
  • Understand the per-unit system and analytical circuit based techniques to calculate industrial power systems for faults.
  • Learn an advanced engineering math software that can be used to make difficult and complicated calculations an easy task.
  • Understand the balanced three-phase faults and unbalanced faults and their analysis using symmetrical components.
  • Application of impedance reduction techniques and positive, negative, and zero sequence circuits and their interconnection for faults.
  • Learn about the CAD driven PC based software that can be used to first confirm results of industrial power systems to be studied and analyzed during the conference and its use for the analysis of more complicated systems
  • Learn how to collect in a structured way data and information needed for a power system before fault analysis

Targeted Competencies:

  • Identification of causes of electrical faults
  • Understanding three-phase short circuit currents
  • Recognition of unsymmetrical faults in transformers
  • Partial discharge phenomena and how to apply the required analysis
  • Representation of unsymmetrical faults in a power system
  • Manual and software-assisted of fault currents
  • Simulation for protection relays configuration

Conference Content:
Unit 1: Introduction to Fault Analysis:

  • Source of fault current
  • Fault statistics
  • Basic assumptions
  • Short-circuit rating of equipment
  • Selecting the correct switchgear rating for fault duties
  • Overview of per-unit system
  • One-line diagrams
  • Sources of impedance data for all items of plant
  • Tutorial to demonstrate the preparation of a system for the study
  • Introduction to the engineering software used throughout the conference to make complex and repetitive calculations as accurate as possible

Unit 2: Three-Phase Short-Circuit Currents:

  • Manual calculation of three-phase short-circuit current
  • Circuit reduction techniques
  • Industrial systems
  • Electricity supply systems
  • Tutorial - based on attendees plant
  • Cables subjected to short-circuit currents
  • Compliance with regulations

Unit 3: Unsymmetrical Fault Conditions:

  • Overview of symmetrical components
  • Consideration of various fault types
  • Sequence networks
  • Consideration of phase shift in two-winding transformers
  • Consideration of earth impedance
  • Consideration of three-winding transformers

Unit 4: Representation of Unsymmetrical Faults in Power Systems:

  • Fault diagrams
  • Interconnected sequence networks
  • Special considerations concerning limitation of earth fault current
  • Demonstration examples based on industrial power systems

Unit 5: Computer-Based Calculation of Faults:

  • Introduction to a scaled-down industrial program capable to model complex power systems under fault conditions
  • Use of the software program in practical studies (checking manual calculations)
  • Industrial standards

Conferences & Workshops
Electrical Faults: Causes, Analysis, Detection & Remedies (C8010)


Mercury dynamic schedule is constantly reviewed and updated to ensure that every category is being addressed at least once a month, if not once every week. Please check the training courses listed below and if you do not find the subject you are interested in, email us or give us a call and we will do our best to assist.

Istanbul Office (Turkey) +905395991206

London (UK) +447481362802

Amman (Jordan) +962785666966